Sign OS
  • Features
  • Trade Link
  • Integrations
  • Compare
  • Pricing
  • Guides
  • About
☰
  • Features
  • Trade Link
  • Integrations
  • Compare
  • Pricing
  • Guides
  • About
  • Sign in
Sign inStart free trial
Sign OS

Job management software for sign shops. Built in Victoria by someone who’s done the jobs.

Product

  • All features
  • Trade Link
  • Pricing
  • Integrations
  • What's new
  • Status

Compare

  • vs shopVOX
  • vs CoreBridge
  • vs SignTracker
  • vs Hexicom
  • vs Cyrious Control
  • vs Ordant
  • vs PrintPLANR
  • vs WorkflowMax
  • vs Printavo
  • vs tradie job apps

Resources

  • Sign shop guides
  • Free templates
  • Overhead calculator
  • Landed cost calculator
  • Blog
  • Help centre

Company

  • About
  • Contact
  • Your data
  • Terms
  • Privacy
  • For installers
  • For suppliers
© 2026 Sign OS · Run by Todd Farrell, sole trader · Victoria, Australia · ABN 50 613 736 709Prices in AUD · Sign in
  1. Sign OS
  2. Features

Sign estimating software that works from your real costs

If your estimating lives in a spreadsheet only one person understands, every quote is a bottleneck and every price is a small act of faith. Sign OS is sign estimating software that works each estimate out from your own costs: the sheets or roll metres the job uses, the machine time, the labour and your markup. Any staff member can produce the estimate your best estimator would, and production, purchasing and invoicing run off the same numbers.

Start your 30-day free trialSee the prices

Where a square metre rate comes unstuck

Take five 1200 × 900 mm panels. By area that is 5.4 m². A 2440 × 1220 mm sheet gives two panels whichever way you turn them, so the job takes three sheets: 8.9 m² of board, with one panel’s worth left over. A square metre rate recovers the 5.4 and leaves the markup to carry the rest.

Quote six and the same three sheets are fully used, so the board in each panel costs a sixth less. A rate card can’t see that step. An estimate worked from the sheet size can, and it shows up in the price at the quantity the customer asked for.

Guide: nesting versus cutting as laid out, with the numbers →

What actually gets automated

An estimate in Sign OS isn't a template. It's computed. The engine takes the product recipe and the job's dimensions and quantities, then derives material consumption (including waste and yield per substrate), machine minutes for each process, labour steps at your department rates, and your markup applied at quote time.

Change the quantity and the whole estimate re-derives: usage, offcut waste, setup versus run time. That's the arithmetic your spreadsheet was approximating, done properly and instantly.

  • Material usage from sheet/roll geometry: waste calculated, not padded
  • Machine time split into setup and run, per process step
  • Labour from department rates and step estimates

Consistency is the real saving

Shops rarely lose money on the jobs they price carefully. They lose it on the Friday-afternoon quote someone rushed. Because Sign OS estimates are recipe-driven, the rushed quote and the careful quote use identical logic. Warnings surface anything unusual; nothing blocks you, but nothing slips through silently either.

And because the estimate becomes the job on acceptance, the numbers production sees are the numbers you quoted: actual time and materials clock against the estimate, and the margin panel shows quoted versus actual live per job.

The floor runs on the same numbers

Estimation isn't a silo in Sign OS. Released jobs reserve stock, purchase orders raise against the job with your suppliers' real prices, cutting and print queues appear on department boards, and installation work is dispatched with site details and job sheets. When the job closes, quoted-versus-actual tells you whether the recipe needs tuning, so estimates get sharper every month.

  • Release wizard validates stock before the floor sees the job
  • Job-linked purchase orders with supplier records and terms
  • Install dispatch with QR job sheets and time clocking
  • Quoted vs actual margin per job: feedback that tunes your recipes

Priced for Australian shops

Sign OS plans are AUD, start at $89/month, and let you compare the package and access your team needs, with no onboarding fees and included users and clearly priced extra user packs. It's built in Australia by people from the sign trade, with a free 30-day trial that doesn't ask for a card.

Sign shop management software: the whole system in one page →

New · private pilot

Trade Link: make what you’re best at. Buy the rest at trade-only prices.

Your customers want one sign company for everything, and they want a sharp price. No shop can make every kind of sign well.

Trade Link lets sign shops buy from each other at trade-only prices. You make the products you’re best at and sell them to other shops. You buy the rest from shops that specialise in them, and supply it to your customer under your own name. The prices are only for shops in the trade. The public never sees them.

How Trade Link works

No cut of any sale and no fee per order. It’s a private pilot for now, and you can ask to be in it.

When you’re the specialist

  • You choose which of your products to list on Trade Link
  • Sell what you make best to other shops, at a trade price you set
  • Orders land as normal jobs, filled in, with nothing retyped
  • Trade prices come off your own costing, so there's no price list to keep up
  • Your recipe and costs stay yours. A buyer sees one trade figure
  • Your terms, your lead times, and you approve who can buy

When another shop is

  • Quote the whole job, with the parts you don't make coming from a shop that specialises in them
  • Your name, your code, your markup. The maker's name isn't on anything your client sees
  • The price is checked at quote and again at Send, so the margin never surprises you
  • It can ship straight to your client on a docket with your logo
  • Status and the maker's bill come back to the job

Fair questions

Is there free sign estimating software?

Sign OS has a free 30-day trial with no card, so you can price your own work against your spreadsheet before paying anything. After the trial, plans start at $89 AUD a month with three users included.

How is this different from a quoting spreadsheet?

A spreadsheet stores formulas one person maintains; Sign OS computes estimates from product recipes everyone shares. Material waste, machine time, labour and markup are derived the same way on every quote, the logic is auditable, and the estimate flows straight into production, purchasing and invoicing instead of being re-keyed.

Can I still override a price?

Always. Sign OS warns, it never blocks. You can override any line and the override is visible, so you keep commercial control while the engine keeps everyone honest.

How long does setup take?

You can be quoting the day you start: the free trial includes a shared catalogue of materials, machines and processes to build from, and every recipe you add makes the next quote faster. If you would rather not build them yourself, we build up to 10 of your products free during the trial, and the rest of your shop at no charge once you subscribe to Workshop or higher.

Does it handle installation work?

Yes. Jobs carry site and logistics details, installation is scheduled on the same department timeline as production, and there's a dedicated portal for install contractors with the job information they need, without exposing your prices.

Keep exploring

  • Everything Sign OS does, on one page
  • Sign shop management software that runs the whole shop
  • An AI assistant for your sign shop, with controls you choose
  • Sign making software, from the quote to the finished sign
  • Production scheduling built for a sign shop floor
  • AI-powered signage quoting software, with prices you can defend
  • A smart MIS for print shops: one system from enquiry to invoice
  • Artwork approval that actually holds up
  • Getting the work out the door, on the record
  • Channel letters, drawn and priced off the real outline
  • Buying for the job, not for the guesswork
  • Trade Link: make what you’re best at, buy the rest at trade-only prices
  • Your own sign store, priced by your own engine
  • What the job actually took, against what you charged for it
  • Let customers design the signs you make
  • Staff records and leave, in one place
  • Keep your workshop safety records together
  • Invoices off the job, synced with Xero or QuickBooks
  • Reports you build yourself, and a home screen for every seat
  • A shopVOX alternative priced for Australian shops
  • A CoreBridge alternative without the enterprise overhead

Try it on your own jobs

30 days free, no card. We build up to 10 of your products while you try it.

Start free trial

On this page

  • Where a square metre rate comes unstuck
  • What actually gets automated
  • Consistency is the real saving
  • The floor runs on the same numbers
  • Priced for Australian shops