Sell letters and neon through the designer
Can customers design cut letters or neon online and get a real price?
- For
- Admins
- Where to find it
- SidebarCatalogueProductsopen the productOnline designerSigns made from wording
- Takes
- 30 minutes, with testing
- You need
- The online designer, and a product whose recipe prices from the letters' measurements
What it is for
A letter sign has no template. The customer's wording is the sign, and the price comes from your own recipe using what is measured off the real letter outlines. You get the cut file and the build details on the job.
After this you can
- Switch a product over to signs made from wording
- Set the sizes and depths you will make
- Test that the price moves the way you would quote it
Step by step
- 1
Switch it on
Open the product and press Online designer. Under Signs made from wording, tick that this product is letters, neon, a cut-out panel, stencil, ring or lightbox.
- 2
Choose the sign types
One product can offer several, but they all price on its one recipe.
- 3
Set your limits
The letter sizes, the smallest and largest you will make, and the return depths. Set your own thinnest part for each sign type if the starting limits do not suit your router or laser.
- 4
Test it
Save, publish and press Test as a customer. Try a short word and a long one, in a thin font and a heavy font, and check the price moves the way you would quote it.
- 5
Check the cut file
Open it before you share the link.
What your recipe gets
| Part | What it does |
|---|---|
| Cut letters | Face area, cut metres, pierces and pins off the real outlines, for flat letters, panels and stencils. |
| LED layout | Face area, perimeter, letter count and return depth for channel letters. The same numbers as sizing it by hand, using your LED range. |
| Neon run length | Metres of tube along the wording. There is also a cut complexity figure for the backing. |
| Width, height, quantity, your options | The overall size and the options they picked, the same as any other product. |
What lands on the job
| Part | What it does |
|---|---|
| Cut file | A layered DXF of the outlines, with bridges on a stencil. Check it before cutting: the bridges are a starting point, not your final layout. |
| Build details | LED and return details for channel letters, kept with the line at the price it was sold. |
| Print PDF, proof, wall picture | The artwork, the proof to send, and the picture of the sign on the wall they chose. |
Tip
Prices are checked against your recipe every time, and the sign is rebuilt when it is saved, so what is priced and what is cut are the same outlines.
Watch out
A product that prices only from width and height will give every wording much the same price.
If your costs are built differently for different sign types, split them into separate products.
The thin-part and loose-part checks are a help, not a replacement for your own check of the file.
Braille plates can be laid out, but they need your own check against the standard. The designer does not certify a sign as compliant.